ウェザーステーション Coastal WEATHERPAKのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Coastal WEATHERPAK 2 ページ。 Tactical weather station
Tactical Weather Station Set-Up Guide
Wind Sensor
WEATHERPAK
KamLock Connector
Junction Box
Visibility
Sensor
Tower Top
Tower Base
Power Supply
(Battery Box)
820 First Avenue South, Seattle, WA 98134
TM
Cloud Height Sensor
(Ceilometer)
Tel: +1 (800) 488-8291 / +1 (206) 682-6048
TM
This is a generic overview of a portable WEATHERPAK
3 meter tripod set-up. Your system may not include all of
the components listed, or may have different components.
Please refer to the assembly documentation provided with
your system or contact Coastal for assistance.
1. Select a level piece of ground about 4 meters in diameter. To
avoid compass error, place the WEATHERPAK
meters, laterally, from any mass of steel (trucks, buildings, etc). In
other words, mounting on top of a van is OK, but right next to it is
not an ideal location.
2. Assemble the lower tower section: Insert the three legs into the
tower base and secure with a turn clockwise, forming a tripod.
Place the tripod in the center of the 4-meter diameter area.
3. Secure the WEATHERPAK
slot on the WEATHERPAK
slot in the KamLock connector. Carefully, but firmly, seat the
WEATHERPAK
into the KamLock (the fit is precision-machined
TM
and may require an extra push). Push the arms of the KamLock
clamp down to assure proper installation.
3a
3b
4. Place the entire unit (upper tower section and WEATHERPAK
onto the tripod and turn clockwise to secure. Hand tighten the
screw.
Rain Gauge
Fax: +1 (206) 682-5658
at least 30
TM
to the tower top: Line up the
TM
bottom connector with the pin
TM
3c
www.CoastalEnvironmental.com
TM
)
TM
4/9/12