Aktakom ACM-2047 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aktakom ACM-2047. Aktakom ACM-2047 11 pages. Clamp meter

III.Operation Instructions

3.1.1 DC Current

a. Set the rotary switch at appropriate DC range.

b. Push the zero button to adjust the reading to zero.

c. Press the trigger to open the jaw and fully enclose the conductor to be

measured. No air gap is allowed between the two half jaws.

d. Read the DCA value from the LCD display.

3.1.2 AC Current

e. Set the rotary switch at appropriate AC range.

f. Press the trigger to open the jaw and fully enclose the conductor to be

measured. No air gap is allowed between the two half jaws.

g. Read the ACA value from the LCD display.

h. Make sure there is at least 0.1A AC current flowing through the

conductor by taking ACA measurement first.