Aktakom ACM-2047 사용자 설명서 - 페이지 7

{카테고리_이름} Aktakom ACM-2047에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktakom ACM-2047 11 페이지. Clamp meter

III.Operation Instructions

3.1.1 DC Current

a. Set the rotary switch at appropriate DC range.

b. Push the zero button to adjust the reading to zero.

c. Press the trigger to open the jaw and fully enclose the conductor to be

measured. No air gap is allowed between the two half jaws.

d. Read the DCA value from the LCD display.

3.1.2 AC Current

e. Set the rotary switch at appropriate AC range.

f. Press the trigger to open the jaw and fully enclose the conductor to be

measured. No air gap is allowed between the two half jaws.

g. Read the ACA value from the LCD display.

h. Make sure there is at least 0.1A AC current flowing through the

conductor by taking ACA measurement first.