Aktobis WDH-MG1 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aktobis WDH-MG1. Aktobis WDH-MG1 10 pages.

Steam nozzle rotation button: With this button you can determine the steam nozzle's swivel radius. The

following options are available:

100° >>>>

360° >>>>>>>>>>

No rotation of the steam nozzle.

Timer function: With this button you have the option of setting a remaining running

(timer) for the appliance until it switches off automatically. You can choose between 1

hours of running time.

Interval setting: Optionally choose between:

A.) An interval with alternating 5-minute operation and then the following

5-minute break (green display)

B.) An interval with alternating 5-minute operation and then the following

10-minute break (orange display)

C.) An interval with alternating 5-minute operation and then the following

15-minute break (red display).

Remote control

All functions and settings as described in the above symbols can also be operated/adjusted with the

supplied remote control.

A button cell CR2025 (3V) is required to operate the remote control.

1. Before use

Carefully remove the humidifier from its packaging box and remove all protective packaging. Place the

humidifier on a firm flat surface that provides sufficient space for the unit and the user. Give the humidifier

about half an hour (to adjust to the room climate) before operating it for the first time.

2. Commissioning

2.1 Open the lid of your humidifier. Take out the white water tank, fill it with

water and then put it back into the appliance.

Notes:

> Always use only water with a temperature below 40°C !

Always use boiled and then cooled water. Excellent is also

distilled water to avoid calcification of your appliance !

Wait briefly for a minute so that the water can distribute well in the lower part of the humidifier.

2.2. Insert the mains plug of the unit into a socket and switch on the unit at the main switch on the side

(see fig. right). The unit is now in standby mode.

2.3. Now press the On/Off button to start the humidification mode. Now the individual setting symbols

including the display of the current room humidity light up and the unit starts humidifying at the highest

humidification level by default.

2.4. Now you can still make your individual settings on the control panel (see key explanation in the function

description).

Instructions for use

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de

time

- 8