Aktobis WDH-MG1 Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Basahi Aktobis WDH-MG1. Aktobis WDH-MG1 10 halaman.
Steam nozzle rotation button: With this button you can determine the steam nozzle's swivel radius. The
following options are available:
100° >>>>
360° >>>>>>>>>>
No rotation of the steam nozzle.
Timer function: With this button you have the option of setting a remaining running
(timer) for the appliance until it switches off automatically. You can choose between 1
hours of running time.
Interval setting: Optionally choose between:
A.) An interval with alternating 5-minute operation and then the following
5-minute break (green display)
B.) An interval with alternating 5-minute operation and then the following
10-minute break (orange display)
C.) An interval with alternating 5-minute operation and then the following
15-minute break (red display).
Remote control
All functions and settings as described in the above symbols can also be operated/adjusted with the
supplied remote control.
A button cell CR2025 (3V) is required to operate the remote control.
1. Before use
Carefully remove the humidifier from its packaging box and remove all protective packaging. Place the
humidifier on a firm flat surface that provides sufficient space for the unit and the user. Give the humidifier
about half an hour (to adjust to the room climate) before operating it for the first time.
2. Commissioning
2.1 Open the lid of your humidifier. Take out the white water tank, fill it with
water and then put it back into the appliance.
Notes:
> Always use only water with a temperature below 40°C !
Always use boiled and then cooled water. Excellent is also
distilled water to avoid calcification of your appliance !
Wait briefly for a minute so that the water can distribute well in the lower part of the humidifier.
2.2. Insert the mains plug of the unit into a socket and switch on the unit at the main switch on the side
(see fig. right). The unit is now in standby mode.
2.3. Now press the On/Off button to start the humidification mode. Now the individual setting symbols
including the display of the current room humidity light up and the unit starts humidifying at the highest
humidification level by default.
2.4. Now you can still make your individual settings on the control panel (see key explanation in the function
description).
Instructions for use
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: [email protected]
time
- 8