BobsCNC KL733 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} BobsCNC KL733. BobsCNC KL733 18 pages. X frame assembly
Également pour BobsCNC KL733 : Manuel d'assemblage (12 pages), Manuel de démarrage (9 pages), Assembly (20 pages)

Imprimer la page
BobsCNC KL733 Manuel

Installing the Runner Boards

Hint
Clamp the Runner Boards to the X frame as shown.
Step 1
NOTE: that the top edge should be 1/16" below the KL733 frame
members.
Drill a 5/16" diameter hole into the Runner Board using the holes
Step 2
on the KL733 X frame holes as pilot holes as shown.
The Baseboard on which the Spoilboard is mounted will be
screwed into the Runner Board. We recommend using a
straight piece of 1 x 3 pine 37 1/2 long to construct the
Runner Boards.
Page 5