BobsCNC KL733 Manuel - Sayfa 5

Kontrol Sistemleri BobsCNC KL733 için çevrimiçi göz atın veya pdf Manuel indirin. BobsCNC KL733 18 sayfaları. X frame assembly
Ayrıca BobsCNC KL733 için: Montaj Kılavuzu (12 sayfalar), Başlangıç Kılavuzu (9 sayfalar), Montaj (20 sayfalar)

Sayfayı Yazdır
BobsCNC KL733 Manuel

Installing the Runner Boards

Hint
Clamp the Runner Boards to the X frame as shown.
Step 1
NOTE: that the top edge should be 1/16" below the KL733 frame
members.
Drill a 5/16" diameter hole into the Runner Board using the holes
Step 2
on the KL733 X frame holes as pilot holes as shown.
The Baseboard on which the Spoilboard is mounted will be
screwed into the Runner Board. We recommend using a
straight piece of 1 x 3 pine 37 1/2 long to construct the
Runner Boards.
Page 5