Canon AE-1 Manuel de procédures d'installation - Page 37
Parcourez en ligne ou téléchargez le pdf Manuel de procédures d'installation pour {nom_de_la_catégorie} Canon AE-1. Canon AE-1 48 pages.
Également pour Canon AE-1 : Pour commencer (2 pages), Manuel d'instructions (22 pages), Manuel (42 pages), Manuel (12 pages), Manuel d'instructions (22 pages)
Imprimer la page
4.1.2
Installation Procedure
1. Detaching the Finisher from the Host Machine
If the host machine is equipped with a finisher, you
will have to detach the finisher before installing the
1) Turn off the host machine, and disconnect the pow-
er plug (from the power outlet).
2) Disconnect the interface cable [ l ] of the finisher
from the host machine.
3) In the case of a Finisher-AEl, remove the screw
[I], and detach the lower front extension cover [2].
Remove the screw [3], and detach the front foot
cover [4].
4) Removelopen the front cover.
<Finisher-AE 1 >
Open the front door [I], and remove the three screws
[2]; then, detach the front cover [3].
<Saddle Finisher-AE2>
Open the front cover [I].