Canon AE-1 Kurulum Prosedürleri Kılavuzu - Sayfa 37
Dijital Kamera Canon AE-1 için çevrimiçi göz atın veya pdf Kurulum Prosedürleri Kılavuzu indirin. Canon AE-1 48 sayfaları.
Ayrıca Canon AE-1 için: Başlarken (2 sayfalar), Talimatlar Kılavuzu (22 sayfalar), Manuel (42 sayfalar), Manuel (12 sayfalar), Talimatlar Kılavuzu (22 sayfalar)
Sayfayı Yazdır
4.1.2
Installation Procedure
1. Detaching the Finisher from the Host Machine
If the host machine is equipped with a finisher, you
will have to detach the finisher before installing the
1) Turn off the host machine, and disconnect the pow-
er plug (from the power outlet).
2) Disconnect the interface cable [ l ] of the finisher
from the host machine.
3) In the case of a Finisher-AEl, remove the screw
[I], and detach the lower front extension cover [2].
Remove the screw [3], and detach the front foot
cover [4].
4) Removelopen the front cover.
<Finisher-AE 1 >
Open the front door [I], and remove the three screws
[2]; then, detach the front cover [3].
<Saddle Finisher-AE2>
Open the front cover [I].