DOMUSA TEKNIK Silo Manuel d'installation et d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} DOMUSA TEKNIK Silo. DOMUSA TEKNIK Silo 20 pages.
Imprimer la pageSilo
IMPORTANT: At each end of the pellet suction and air return hose, the copper cables must be
connected to the earth connection terminals provided on the Silo for this purpose.
IMPORTANT: DOMUSA TEKNIK will hold no liability for malfunctioning of the Silo in combination
with the CVS suction system if the installation does not comply with the above
recommendations.
3.4
Earth connection
For safety reasons, the suction pot, CVS suction system nozzle and metal structure of the Silo must
be earthed, to prevent danger of the pellets or Silo catching fire due to sparks generated by
electrostatic charge accumulation during functioning of the automatic loading CVS suction
system.
The Silo is specially designed to work as part of an installation with a plastic hose with an interior
diameter of 50 mm. This hose must have a static electricity discharge system, preferably a copper
wire wound around its entire length. This copper wire must be earthed at all the hose joints and
ends.
There is an earthing socket on the underside of the suction pot of the CVS suction system, to which
the earth cables of the pneumatic installation tubes should be connected. These tubes are then
connected to the earth at the other end of the installation (see the section
pot"
).
8
"Assembling the suction