DOMUSA TEKNIK Silo Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 10

Soba DOMUSA TEKNIK Silo için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. DOMUSA TEKNIK Silo 20 sayfaları.

Silo

IMPORTANT: At each end of the pellet suction and air return hose, the copper cables must be

connected to the earth connection terminals provided on the Silo for this purpose.

IMPORTANT: DOMUSA TEKNIK will hold no liability for malfunctioning of the Silo in combination

with the CVS suction system if the installation does not comply with the above

recommendations.

3.4

Earth connection

For safety reasons, the suction pot, CVS suction system nozzle and metal structure of the Silo must

be earthed, to prevent danger of the pellets or Silo catching fire due to sparks generated by

electrostatic charge accumulation during functioning of the automatic loading CVS suction

system.

The Silo is specially designed to work as part of an installation with a plastic hose with an interior

diameter of 50 mm. This hose must have a static electricity discharge system, preferably a copper

wire wound around its entire length. This copper wire must be earthed at all the hose joints and

ends.

There is an earthing socket on the underside of the suction pot of the CVS suction system, to which

the earth cables of the pneumatic installation tubes should be connected. These tubes are then

connected to the earth at the other end of the installation (see the section

pot"

"Assembling the suction