Ekinex EK-HC1-TP Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ekinex EK-HC1-TP. Ekinex EK-HC1-TP 5 pages. Controllers for fan coil

Imprimer la page

Configuration and commissioning

Configuration and commissioning of the device require

the use of the ETS

program V4 or later releases. These activities must be

carried out according to the design of the building

automation system done by a qualified planner.

Configuration For the configuration of the device

parameters the corresponding application program or

the whole ekinex

product database must be loaded in

the ETS program.

For detailed information on configuration options, refer

to the application manual of the device available on the

website

www.ekinex.com

Application software

Product code

(## = version)

EK-HA1-TP

APEKHA1TP##.knxprod

EK-HB1-TP

APEKHB1TP##.knxprod

EK-HC1-TP

APEKHC1TP##.knxprod

Note. The configuration and commissioning of KNX

devices require specialized skills. To acquire these

skills, you should attend the workshops at KNX

certified training centers.

Commissioning

For commissioning the device the following activities

are required:

•

make the electrical connections as described above;

•

turn on the bus power supply;

•

switch the device operation to the programming

mode by pressing the programming pushbutton

located on the front side of the housing. In this

mode of operation, the programming LED is turned

on;

•

download into the device the physical address and

the configuration with the ETS

At the end of the download the operation of the device

automatically returns to normal mode; in this mode the

programming LED is turned off. Now the bus device is

programmed and ready for use.

Dimensions [mm] (All versions)

Marks

(Engineering Tool Software)

Communi-

Group

cation

adresses

objects

(max nr.)

254

program.

the device complies with the Low Voltage

Directive (2006/95/EC) and the

Electromagnetic Compatibility Directive

(2004/108/EC).

Tests carried out according to

EN 50491-2:2010, EN 50491-3:2009,

EN 50491-4 - 1:2012, EN 50491-5-1:2010,

EN 50491-5-2:2010, EN 50428:2005

+A1:2007 + A2:2009

Maintenance

The device is maintenance-free. To clean use a dry

cloth. It must be avoided the use of solvents or other

aggressive substances.

Disposal

At the end of its useful life the product described in this

datasheet is classified as waste from electronic

equipment in accordance with the European Directive

2002/96/EC (WEEE), and cannot be disposed together

with the municipal undifferentiated solid waste.

Warning! Incorrect disposal of this product may cause

serious damage to the environment and human health.

Please be informed about the correct disposal

procedures for waste collecting and processing

provided by local authorities.

Documentation

This datasheet refers to the release A1.0 of the ekinex

devices EK-HA1-TP, EK-HB1-TP and EK-HC1-TP, and

is available for download at www.ekinex.com as a PDF

(Portable Data Format) file

Filename

STEKHx1TP_EN.pdf

Warnings

•

Installation, electrical connection, configuration and

commissioning of the device can only be carried out

by qualified personnel in compliance with the

applicable technical standards and laws of the

respective countries

•

The use of the device in security applications is not

allowed. The device may however be used for

auxiliary signaling functions

•

Opening the housing of the device causes the

immediate end of the warranty period

•

In case of tampering, the compliance with the

essential requirements of the applicable directives,

for which the device has been certified, is no longer

guaranteed

•

ekinex

KNX defective devices must be returned to

the manufacturer at the following address: EKINEX

S.p.A. Via Novara 37, I-28010 Vaprio d'Agogna

(NO) Italy Other information

•

This datasheet is aimed at installers, system

integrators and planners

•

For further information on the product, please

contact the ekinex

address: [email protected] or visit the website

www.ekinex. Com

•

KNX

and ETS

Association cvba, Brussels

this documentation without notice.

Page 5

Device release

Updating

01/2016

A1.0

technical support at the e-mail

are registered trademarks of KNX