Ekinex EK-HC1-TP Manual - Página 5

Procurar online ou descarregar pdf Manual para Controlador Ekinex EK-HC1-TP. Ekinex EK-HC1-TP 5 páginas. Controllers for fan coil

Configuration and commissioning
Configuration and commissioning of the device require
®
the use of the ETS
program V4 or later releases. These activities must be
carried out according to the design of the building
automation system done by a qualified planner.
Configuration For the configuration of the device
parameters the corresponding application program or
the whole ekinex
®
product database must be loaded in
the ETS program.
For detailed information on configuration options, refer
to the application manual of the device available on the
website
www.ekinex.com
Application software
Product code
(## = version)
EK-HA1-TP
APEKHA1TP##.knxprod
EK-HB1-TP
APEKHB1TP##.knxprod
EK-HC1-TP
APEKHC1TP##.knxprod
Note. The configuration and commissioning of KNX
devices require specialized skills. To acquire these
skills, you should attend the workshops at KNX
certified training centers.
Commissioning
For commissioning the device the following activities
are required:
make the electrical connections as described above;
turn on the bus power supply;
switch the device operation to the programming
mode by pressing the programming pushbutton
located on the front side of the housing. In this
mode of operation, the programming LED is turned
on;
download into the device the physical address and
the configuration with the ETS
At the end of the download the operation of the device
automatically returns to normal mode; in this mode the
programming LED is turned off. Now the bus device is
programmed and ready for use.
Dimensions [mm] (All versions)
90
Marks
(Engineering Tool Software)
Communi-
Group
cation
adresses
objects
(max nr.)
(max nr.)
45
254
45
254
63
254
®
program.
72
the device complies with the Low Voltage
Directive (2006/95/EC) and the
Electromagnetic Compatibility Directive
(2004/108/EC).
Tests carried out according to
EN 50491-2:2010, EN 50491-3:2009,
EN 50491-4 - 1:2012, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 50428:2005
+A1:2007 + A2:2009

Maintenance

The device is maintenance-free. To clean use a dry
cloth. It must be avoided the use of solvents or other
aggressive substances.
Disposal
At the end of its useful life the product described in this
datasheet is classified as waste from electronic
equipment in accordance with the European Directive
2002/96/EC (WEEE), and cannot be disposed together
with the municipal undifferentiated solid waste.
Warning! Incorrect disposal of this product may cause
serious damage to the environment and human health.
Please be informed about the correct disposal
procedures for waste collecting and processing
provided by local authorities.
Documentation
This datasheet refers to the release A1.0 of the ekinex
devices EK-HA1-TP, EK-HB1-TP and EK-HC1-TP, and
is available for download at www.ekinex.com as a PDF
(Portable Data Format) file
Filename
STEKHx1TP_EN.pdf
Warnings
Installation, electrical connection, configuration and
commissioning of the device can only be carried out
by qualified personnel in compliance with the
applicable technical standards and laws of the
respective countries
The use of the device in security applications is not
allowed. The device may however be used for
auxiliary signaling functions
Opening the housing of the device causes the
immediate end of the warranty period
In case of tampering, the compliance with the
essential requirements of the applicable directives,
for which the device has been certified, is no longer
guaranteed
®
ekinex
KNX defective devices must be returned to
the manufacturer at the following address: EKINEX
S.p.A. Via Novara 37, I-28010 Vaprio d'Agogna
(NO) Italy Other information
This datasheet is aimed at installers, system
integrators and planners
For further information on the product, please
contact the ekinex
address: [email protected] or visit the website
www.ekinex. Com
KNX
®
and ETS
Association cvba, Brussels
© EKINEX S.p.A. The company reserves the right to make changes to
this documentation without notice.
Page 5
.
Device release
Updating
01/2016
A1.0
®
technical support at the e-mail
®
are registered trademarks of KNX
®