Aston Martin Zygote Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aston Martin Zygote. Aston Martin Zygote 20 pages.

Aston Martin Zygote Manuel de l'utilisateur

WIRELESS SETUP

The Zygote app makes it easy to set up and manage
the Zygote, walking you through the simple steps to
connect you to your Wi-Fi, and choose and manage
your settings, all wirelessly.
The Zygote has a wireless setup mode for Apple
Airplay and DLNA. In this mode, the Zygote can be
set up towards a router or as a Wi-Fi direct access
point. When set up against a router, the devices
streaming audio to Zygote needs to be connected to
the same router. When Zygote is set up in Wi-Fi Direct
mode, the Zygote has its own SSID, and the devices
streaming to it connects directly to the Zygote without
using a router.
The Zygote has a built in Wi-Fi network adapter.
The network setting can be used in two modes. The
standard mode is when you connect the Zygote to an
existing Wi-Fi network. An alternative mode is to set
up the Zygote as Wi-Fi direct. In Wi-Fi direct mode
it creates its own Wi-Fi network. You can access this
network by looking for a network named "Zygote +
4 digit code" and connect to it. All Wi-Fi network
setup modes require that the Zygote is in Wi-Fi setup
mode. Turn on your Zygote, then touch and hold the
input selector for five seconds until the LED flashes in
purple to enter Wi-Fi setup mode.
Setup alternatives (in Wi-Fi setup mode):
• Setting Wi-Fi direct mode
Touch the power button. The Zygote enters Wi-Fi
direct mode and exits the Wi-Fi setup mode.
• Setting up the Zygote to a router
In Wi-Fi setup mode, the Zygote is ready to accept
incoming WPS. Push the WPS button on the router (or
activate in the router software UI if no such button is
present) in order to share the setup key from the router
to the Zygote. When the Zygote receives the key, it is
automatically stored.
10
• WPS setup
In Wi-Fi setup mode, the Zygote is ready to accept
incoming WPS. Connect a USB cable between the
USB port and your Apple iOS device. Accept to share
the network key. Now the Zygote receives the key
from the iOS device and connects itself up against the
router.
• WAC setup
In Wi-Fi setup mode, touch the input selector the
enable WAC feature. When the LED stop flashing
rapidly in purple, you can find "Zygote + 4 digit code"
in the Wi-Fi list of your Apple iOS device. You can
setup the Zygote from your iOS device directly.
• Exit Wi-Fi setup mode
If the wireless network port is activated or deactivated,
the LED will light up for two seconds before returning
to the current input source. The Zygote will also exit
Wi-Fi setup mode automatically after two minutes
timeout.
Firmware upgrade
The Zygote firmware can be upgraded from the Zygote
app. When the app connects to the Zygote, it performs
a search for the latest firmware. If a new firmware is
detected, follow the instructions on your device to
install. This function will not work if your device is
connected to the Zygote with Wi-Fi Direct, as this
setup do not allow the Zygote to connect to Internet.
Troubleshooting 
For trouble shooting information, please visit
audiomoda.com/support
www.