Aston Martin Zygote Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara Aston Martin Zygote. Aston Martin Zygote 20 halaman.

Halaman Cetak

WIRELESS SETUP

The Zygote app makes it easy to set up and manage

the Zygote, walking you through the simple steps to

connect you to your Wi-Fi, and choose and manage

your settings, all wirelessly.

The Zygote has a wireless setup mode for Apple

Airplay and DLNA. In this mode, the Zygote can be

set up towards a router or as a Wi-Fi direct access

point. When set up against a router, the devices

streaming audio to Zygote needs to be connected to

the same router. When Zygote is set up in Wi-Fi Direct

mode, the Zygote has its own SSID, and the devices

streaming to it connects directly to the Zygote without

using a router.

The Zygote has a built in Wi-Fi network adapter.

The network setting can be used in two modes. The

standard mode is when you connect the Zygote to an

existing Wi-Fi network. An alternative mode is to set

up the Zygote as Wi-Fi direct. In Wi-Fi direct mode

it creates its own Wi-Fi network. You can access this

network by looking for a network named "Zygote +

4 digit code" and connect to it. All Wi-Fi network

setup modes require that the Zygote is in Wi-Fi setup

mode. Turn on your Zygote, then touch and hold the

input selector for five seconds until the LED flashes in

purple to enter Wi-Fi setup mode.

Setup alternatives (in Wi-Fi setup mode):

• Setting Wi-Fi direct mode

Touch the power button. The Zygote enters Wi-Fi

direct mode and exits the Wi-Fi setup mode.

• Setting up the Zygote to a router

In Wi-Fi setup mode, the Zygote is ready to accept

incoming WPS. Push the WPS button on the router (or

activate in the router software UI if no such button is

present) in order to share the setup key from the router

to the Zygote. When the Zygote receives the key, it is

automatically stored.

• WPS setup

In Wi-Fi setup mode, the Zygote is ready to accept

incoming WPS. Connect a USB cable between the

USB port and your Apple iOS device. Accept to share

the network key. Now the Zygote receives the key

from the iOS device and connects itself up against the

router.

• WAC setup

In Wi-Fi setup mode, touch the input selector the

enable WAC feature. When the LED stop flashing

rapidly in purple, you can find "Zygote + 4 digit code"

in the Wi-Fi list of your Apple iOS device. You can

setup the Zygote from your iOS device directly.

• Exit Wi-Fi setup mode

If the wireless network port is activated or deactivated,

the LED will light up for two seconds before returning

to the current input source. The Zygote will also exit

Wi-Fi setup mode automatically after two minutes

timeout.

Firmware upgrade

The Zygote firmware can be upgraded from the Zygote

app. When the app connects to the Zygote, it performs

a search for the latest firmware. If a new firmware is

detected, follow the instructions on your device to

install. This function will not work if your device is

connected to the Zygote with Wi-Fi Direct, as this

setup do not allow the Zygote to connect to Internet.

Troubleshooting

For trouble shooting information, please visit

audiomoda.com/support