Donn Steward CPUville 8-bit Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Donn Steward CPUville 8-bit. Donn Steward CPUville 8-bit 14 pages. Processor register display kit
Imprimer la page4. You might have to bend the leads on components, ICs or IC sockets to get them to fit into
the holes on the boards. For an IC, place the part on the table and bend the leads all at once,
like this:
Bending the leads one-by-one or all together with the needle nose pliers doesn't work as
well for some reason.
Also, some components have leads bent outward to fit in a certain printed circuit board
footprint, but will fit a smaller footprint if you bend the leads in with a needle-nosed pliers.
Here is a tantalum capacitor, one with wide leads, the other with narrow leads, from bending
the wide leads in:
6