Donn Steward CPUville 8-bit Kullanım Kılavuzu - Sayfa 6
Monitör Donn Steward CPUville 8-bit için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Donn Steward CPUville 8-bit 14 sayfaları. Processor register display kit
Sayfayı Yazdır4. You might have to bend the leads on components, ICs or IC sockets to get them to fit into
the holes on the boards. For an IC, place the part on the table and bend the leads all at once,
like this:
Bending the leads one-by-one or all together with the needle nose pliers doesn't work as
well for some reason.
Also, some components have leads bent outward to fit in a certain printed circuit board
footprint, but will fit a smaller footprint if you bend the leads in with a needle-nosed pliers.
Here is a tantalum capacitor, one with wide leads, the other with narrow leads, from bending
the wide leads in:
6