Astonica 40200091 Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Astonica 40200091. Astonica 40200091 3 pages.
Imprimer la page
PARTS & HARDWARE LIST
PART #
PART #
DESCRIPTION
A
Base Pedestal
B
Large Basin
C
Center Pedestal
D
Small Basin
E
Electric Pump
Parts Detail
A
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
ASSEMBLY INSTRUCTIONS
1. (SEE FIGURE 1) Place the base pedestal (A) on
flat, level surface. Put the large basin (B) on the
base pedestal (A) aligning the tabs of the basin
with the notches in the top of the base pedestal
(A). Turn the large basin counter clockwise to
lock into place. Put the electric pump (E) into
the center ring in the bottom of large basin (B)
beside the PVC tube. Place the power cord of
the pump (E) through the PVC tube in the
pedestal base (A) and out the bottom of the base
as shown.
QUANTITY
B
C
E
D
Figure 1
Power Cord
E
B
Basin Tab
Power Cord
Basin Notch
Power Cord
2
2. (SEE FIGURE 2) Feed the tube on the small
1
basin (D) through the center pedestal (C), then
1
connect the small basin (D) to the center
1
pedestal (C) by aligning the tabs of the small
1
basin with the notches in the top of the center
1
pedestal. Secure the small basin (D) by turning
counter clockwise onto the center pedestal (C).
3.
3. (SEE FIGURE 3) Connect the tube of the small
basin (D) to the spout on the electric pump (E).
4. Place the center pedestal and small basin
assembly (C,D) in the center of large basin (B)
making sure the electric pump (E) is inside the
center pedestal.
A
ASSEMBLY INSTRUCTIONS
Figure 2
D
Figure 3
B
3
Tubing
C
D
C
Tubing
E