Astonica 40200091 사용 설명서 - 페이지 3
{카테고리_이름} Astonica 40200091에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astonica 40200091 3 페이지.
페이지 인쇄
PARTS & HARDWARE LIST
PART #
PART #
DESCRIPTION
A
Base Pedestal
B
Large Basin
C
Center Pedestal
D
Small Basin
E
Electric Pump
Parts Detail
A
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
ASSEMBLY INSTRUCTIONS
1. (SEE FIGURE 1) Place the base pedestal (A) on
flat, level surface. Put the large basin (B) on the
base pedestal (A) aligning the tabs of the basin
with the notches in the top of the base pedestal
(A). Turn the large basin counter clockwise to
lock into place. Put the electric pump (E) into
the center ring in the bottom of large basin (B)
beside the PVC tube. Place the power cord of
the pump (E) through the PVC tube in the
pedestal base (A) and out the bottom of the base
as shown.
QUANTITY
B
C
E
D
Figure 1
Power Cord
E
B
Basin Tab
Power Cord
Basin Notch
Power Cord
2
2. (SEE FIGURE 2) Feed the tube on the small
1
basin (D) through the center pedestal (C), then
1
connect the small basin (D) to the center
1
pedestal (C) by aligning the tabs of the small
1
basin with the notches in the top of the center
1
pedestal. Secure the small basin (D) by turning
counter clockwise onto the center pedestal (C).
3.
3. (SEE FIGURE 3) Connect the tube of the small
basin (D) to the spout on the electric pump (E).
4. Place the center pedestal and small basin
assembly (C,D) in the center of large basin (B)
making sure the electric pump (E) is inside the
center pedestal.
A
ASSEMBLY INSTRUCTIONS
Figure 2
D
Figure 3
B
3
Tubing
C
D
C
Tubing
E