Amerisolar AS-6P27 Manuel d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Amerisolar AS-6P27. Amerisolar AS-6P27 11 pages. Solar module
Imprimer la pageWorldwide Energy and Manufacturing (Nantong) Co., Limited
Fig.2 The module installed on long frames with screw mounting method
(b) Clamp mounting
The modules can be installed in both landscape (clamping on the short frame) and portrait
(clamping on the long frame) modes by clamp mounting.
The module clamps should not come into contact with the front glass and must not deform
the frame.
Be sure to avoid shadowing effects from the module clamps.
The module frame is not to be modified under any circumstances.
When choosing this type of clamp mounting method, please be sure to use at least four
clamps on each module, two clamps should be attached on each frame of the module.
Depending on the local wind and snow loads, if the pressure load exceeds 2400Pa,
additional clamps or support would be required to ensure the module can bear the load.
For clamp mounting on the long or short frame of the module, please refer to Fig.3 and Fig.4
respectively.
Fig.3 The module installed on long frames with clamp mounting method
200mm
1/4 length
Length
4