Amerisolar AS-6P27 설치 매뉴얼 - 페이지 6

{카테고리_이름} Amerisolar AS-6P27에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amerisolar AS-6P27 11 페이지. Solar module

Worldwide Energy and Manufacturing (Nantong) Co., Limited

Fig.2 The module installed on long frames with screw mounting method

(b) Clamp mounting

The modules can be installed in both landscape (clamping on the short frame) and portrait



(clamping on the long frame) modes by clamp mounting.

The module clamps should not come into contact with the front glass and must not deform



the frame.

Be sure to avoid shadowing effects from the module clamps.



The module frame is not to be modified under any circumstances.



When choosing this type of clamp mounting method, please be sure to use at least four



clamps on each module, two clamps should be attached on each frame of the module.

Depending on the local wind and snow loads, if the pressure load exceeds 2400Pa,

additional clamps or support would be required to ensure the module can bear the load.

For clamp mounting on the long or short frame of the module, please refer to Fig.3 and Fig.4

respectively.

Fig.3 The module installed on long frames with clamp mounting method

200mm

1/4 length

Length