Canon PIXMA MP495 Series Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Canon PIXMA MP495 Series. Canon PIXMA MP495 Series 22 pages. Cartridge reset
Également pour Canon PIXMA MP495 Series : Manuel du réseau (20 pages), Manuel (8 pages), Manuel de configuration du réseau (24 pages), Manuel de configuration du réseau (9 pages), Manuel (4 pages)

Installing the Drivers & Software

Step Ten

10-A

If the Detected Access Points List screen appears:

If the screen below does not appear, perform 10-B.

1. Select the target access point name/network name (SSID).

2. Enter the network key.

Enter upper and lower case letters of the alphabet correctly.

Letters are case sensitive.

To use WEP key number 2, 3 or 4, click WEP Key Number, then

specify the WEP key number.

3. Click Connect

Go to Step Eleven.

Note:

If the target access point is not displayed on the Detected

Access Points List or Access Points screen, refer to the printed

manual: Network Setup Troubleshooting.

For details on how to check the access point name/network

name (SSID) and network key, refer to the manual supplied

with your access point or contact its manufacturer.

<< Previous

Next >>