Canon PIXMA MP495 Series Manuale di installazione - Pagina 11

Sfoglia online o scarica il pdf Manuale di installazione per Stampante All in One Canon PIXMA MP495 Series. Canon PIXMA MP495 Series 22. Cartridge reset
Anche per Canon PIXMA MP495 Series: Manuale di rete (20 pagine), Manuale (8 pagine), Manuale di configurazione della rete (24 pagine), Manuale di configurazione della rete (9 pagine), Manuale (4 pagine)

Installing the Drivers & Software

Step Ten

10-A

If the Detected Access Points List screen appears:

If the screen below does not appear, perform 10-B.

1. Select the target access point name/network name (SSID).

2. Enter the network key.

Enter upper and lower case letters of the alphabet correctly.

Letters are case sensitive.

To use WEP key number 2, 3 or 4, click WEP Key Number, then

specify the WEP key number.

3. Click Connect

Go to Step Eleven.

Note:

If the target access point is not displayed on the Detected

Access Points List or Access Points screen, refer to the printed

manual: Network Setup Troubleshooting.

For details on how to check the access point name/network

name (SSID) and network key, refer to the manual supplied

with your access point or contact its manufacturer.

<< Previous

Next >>