Canon PIXMA MP610 Series Manuel d'entretien - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Canon PIXMA MP610 Series. Canon PIXMA MP610 Series 45 pages. All-in-one photo inkjet printer
Également pour Canon PIXMA MP610 Series : Commencer ici (2 pages), Manuel complémentaire (6 pages), Brochure & Specs (2 pages), Manuel de démarrage rapide (40 pages), Manuel de démarrage rapide (2 pages)
Imprimer la page
- 1. Table of Contents
- 1. 1 Maintenance
- 1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer
- 1. Customer Maintenance
- 1. Special Tools
- 1. Serial Number Location
- 2. 2 List of Error Display / Indication
- 2. Operator Call Errors
- 2. Service Call Errors
- 2. Other Error Messages
- 2. Warnings
- 2. Troubleshooting by Symptom
- 3. 3 Repair
- 3. Notes on Service Part Replacement
- 3. Adjustment / Settings
- 3. Verification Items
Easy-Scroll Wheel base
Document pressure plate
unit
Document pressure plate
sheet
Document pressure plate
sheet frame
Scanner unit
Operation panel board
ass'y
LCD viewer unit
Timing slit strip film
Timing slit disk film
Timing slit disk eject film
Print head
*1: General notes:
- Make sure that the flexible cables and wires in the harness are in the proper position and connected correctly. See
Special Notes on Repair Servicing
- Do not drop the ferrite core, which may cause damage.
- Protect electrical parts from damage due to static electricity.
- Before removing a unit, after removing the power cord, allow the machine to sit for approx. 1 minute (for capacitor
discharging to protect the logic board ass'y from damages).
- Do not touch the timing slit strip film, timing slit disk film, and timing slit disk eject film. No grease or abrasion is
allowed.
- Protect the units from soiled with ink.
- Protect the housing from scratches.
- For the MP610 automatic print head alignment, use Matte Photo Paper (MP-101) to ensure alignment accuracy.
- Exercise caution with the screws, as follows:
i. The screws of the paper feed motor may be loosened only at replacement of the paper feed motor unit (DO
NOT loosen them in other cases).
ii. DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning
(they are not adjustable in servicing)
- Be cautious not to scratch or
damage the LCD hinge FFC.
- Upon contact with the film,
wipe the film with ethanol.
- Confirm no grease is on the
film. (Wipe off any grease
thoroughly with ethanol.)
- Do not bend the film
or the Parts Catalog for details.
<3-1. Notes on Service Part Replacement>
[See
3-3. Adjustment / Settings,
(3) Grease
application, for
details.]
After replacement:
1. Confirm the document
pressure plate sheet position.
[See
3-3. Adjustment /
Settings, (2) Document
pressure plate sheet
replacement, for details.]
2. Check the LCD and operation
panel.
[See
3-3. Adjustment /
Settings, (6) Service
mode,
for details.]
At replacement:
1. Check the LCD and operation
panel.
[See
3-3. Adjustment /
Settings, (6) Service
mode,
for details.]
After replacement:
1. Perform print head alignment
in the user mode.
2. Perform LF / Eject correction
in the service mode.
[See
3-3. Adjustment /
Settings, (6) Service
mode,
for details.]
After replacement:
1. Perform print head alignment
in the user mode.
13 / 43
- Service test print
- Service test print
3-2.