DAC VS Recorder Manuel d'installation rapide - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} DAC VS Recorder. DAC VS Recorder 13 pages.

Step 7. Test your dictate station. You should hear a prompt for user ID when you log on.

If you are using more than one dictate station

You will follow all of the steps above, except for Step 4. The Station jacks on the junction box receive a

single-pair wire. The Port jacks on the junction box, though, output two pair, carrying the current from

both Station 1 & 2 (Port 1) or Station 3 & 4 (Port 2). However, the VS Recorder voice card only receives a

single pair on each Line jack. Thus, the current you are carrying in the two-pair wire from Port 1 must be

spliced into two, single-pair wires, and have new jacks crimped onto the end of the wire.

So, for example, when the telephone cable terminates into the Port 1 jack on the junction box, the

cable's two inside wires should be the pair going into Line 1. The two outside wires should be the pair going

into Line 2. The diagram above shows how to implement several dictate stations.

Pg. 10

VS Recorder – Direct-wired Stations/Setup

visit us online @ www.dacsolution.com