Canon PIXMA MX340 Series Manuel d'entretien simplifié - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien simplifié pour {nom_de_la_catégorie} Canon PIXMA MX340 Series. Canon PIXMA MX340 Series 35 pages. Cartridge reset
Également pour Canon PIXMA MX340 Series : Manuel d'installation (17 pages), Manuel d'installation (11 pages), Manuel de configuration du réseau (26 pages), Brochure (2 pages), Manuel (8 pages), Manuel (10 pages), Dépannage de la configuration du réseau (13 pages), Manuel d'installation du réseau (16 pages), Manuel de connexion (11 pages), Manuel (4 pages)

Whole Replacement is for heavy users since once Whole Replacement is performed, the printer

allows users to output approx.17, 000 pages. However, approx. 60 minutes is necessary to operate

Whole Replacement.

Partial Replacement

Whole Replacement

1) Partial replacement

Remove the Rear Cover Unit and Logic Board Ass'y, then replace the ink absorber.

(Time required: Approx. 13 min. including the operation check after replacement)

< How to perform the partial replacement >

i. Pull out the Rear Cover Unit, and remove 5 connectors from the Logic Board Ass'y, the

DCD board connector, 2 screws, 1 flexible cable, and 1 screw from the Side Cover R.

For your reference, see the red circles in the following photos below.

ii. Lifting the Logic Board Ass'y, pull out the ink absorbers (QC2-9603/QC2-9604) with a pair

of tweezers. For your reference, see the red circle in the following photo below (pull out A

first, and then B after sliding it to the location where absorber A was.).

Difficulties

Low (approx. 13 min.)

High (approx. 60 min.)

(24/37)

Print yield after replacement

Approx. 10,000

Approx. 17,000

Absorbers for Partial Replacement