Canon PIXMA MX340 Series Упрощенное руководство по обслуживанию - Страница 25

Просмотреть онлайн или скачать pdf Упрощенное руководство по обслуживанию для Принтер "все в одном Canon PIXMA MX340 Series. Canon PIXMA MX340 Series 35 страниц. Cartridge reset
Также для Canon PIXMA MX340 Series: Руководство по установке (17 страниц), Руководство по установке (11 страниц), Руководство по настройке сети (26 страниц), Брошюра (2 страниц), Руководство (8 страниц), Руководство (10 страниц), Устранение неполадок при настройке сети (13 страниц), Руководство по установке сети (16 страниц), Руководство по подключению (11 страниц), Руководство (4 страниц)

Whole Replacement is for heavy users since once Whole Replacement is performed, the printer

allows users to output approx.17, 000 pages. However, approx. 60 minutes is necessary to operate

Whole Replacement.

Partial Replacement

Whole Replacement

1) Partial replacement

Remove the Rear Cover Unit and Logic Board Ass'y, then replace the ink absorber.

(Time required: Approx. 13 min. including the operation check after replacement)

< How to perform the partial replacement >

i. Pull out the Rear Cover Unit, and remove 5 connectors from the Logic Board Ass'y, the

DCD board connector, 2 screws, 1 flexible cable, and 1 screw from the Side Cover R.

For your reference, see the red circles in the following photos below.

ii. Lifting the Logic Board Ass'y, pull out the ink absorbers (QC2-9603/QC2-9604) with a pair

of tweezers. For your reference, see the red circle in the following photo below (pull out A

first, and then B after sliding it to the location where absorber A was.).

Difficulties

Low (approx. 13 min.)

High (approx. 60 min.)

(24/37)

Print yield after replacement

Approx. 10,000

Approx. 17,000

Absorbers for Partial Replacement