Canon PIXMA MX512 Manuel de configuration - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Canon PIXMA MX512. Canon PIXMA MX512 22 pages. Guide for printer setup for network [spanish version]
Également pour Canon PIXMA MX512 : Manuel de démarrage (4 pages), Manuel d'installation (7 pages), Manuel de configuration (3 pages), Configuration du fax (2 pages), Spécifications (2 pages), Mise en place (29 pages), Manuel d'installation (17 pages), Manuel (4 pages), (anglais) Configuration Guide (22 pages)

Wired Connection

a Preparation for Connection

Before Starting Wired Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the lamp on one of the mode buttons (A) will be lit.

Notes on Wired Connection

•

Make sure that the computer and router (A) (or access point) are connected.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

•

system environment. For details, refer to the manual of your network device or contact its manufacturer.

•

For ofﬁ ce use, consult your network administrator.

•

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

data such as your personal information to a third party.

•

This printer cannot be used over wireless and wired connections at the same time.

•

When using a router, connect the printer and computer to the LAN side (same network segment).

b Cable Connection

You will need an Ethernet cable (sold separately).

1. Remove the Cap (A) of the second port from the top located on the left side at the back of the printer.

2. Connect the printer and a network device (router, etc.) with an Ethernet cable (A).