Canon PIXMA MX512 설정 매뉴얼 - 페이지 9

{카테고리_이름} Canon PIXMA MX512에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX512 22 페이지. Guide for printer setup for network [spanish version]
Canon PIXMA MX512에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (4 페이지), 설치 매뉴얼 (7 페이지), 설정 매뉴얼 (3 페이지), 팩스 설정 (2 페이지), 사양 (2 페이지), 설정 (29 페이지), 설치 매뉴얼 (17 페이지), 매뉴얼 (4 페이지), (영어) 구성 가이드 (22 페이지)

페이지 인쇄
Canon PIXMA MX512 설정 매뉴얼

Wired Connection

a Preparation for Connection
Before Starting Wired Connection Setup
1. Make sure that the printer is turned on.
If the power is on, the lamp on one of the mode buttons (A) will be lit.
Notes on Wired Connection
•
Make sure that the computer and router (A) (or access point) are connected.
The confi guration, router functions, setup procedures and security settings of the network device vary depending on your
•
system environment. For details, refer to the manual of your network device or contact its manufacturer.
•
For offi ce use, consult your network administrator.
•
Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing
data such as your personal information to a third party.
•
This printer cannot be used over wireless and wired connections at the same time.
•
When using a router, connect the printer and computer to the LAN side (same network segment).
b Cable Connection
You will need an Ethernet cable (sold separately).
1. Remove the Cap (A) of the second port from the top located on the left side at the back of the printer.
2. Connect the printer and a network device (router, etc.) with an Ethernet cable (A).