Canon PIXMA MX700 Series Manuel d'entretien - Page 38

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Canon PIXMA MX700 Series. Canon PIXMA MX700 Series 44 pages. Office all-in-one printer
Également pour Canon PIXMA MX700 Series : Manuel de nettoyage (7 pages), Manuel de configuration du réseau (32 pages), Manuel complémentaire (6 pages), Instructions d'installation (2 pages), Brochure & Specs (2 pages), Informations techniques (2 pages)

(11) PTT Parameter mode

Enter the PTT parameter mode from the user mode, but not from the service mode.

1) In the user mode, press the SCAN button to enter the scan mode.

2-a) Press #, 9, 7, 6, 9, # to enter the PTT parameter mode.

2-b) Press #, 9, 7, 6, 8, # to print the PTT parameter setting value.

How to finalize the data:

Press the OK button to finalize the data and press the Stop/Reset button to save the data.

How to finish the PTT parameter mode:

Press the ON/OFF button to save the specified data in the EEPROM and turn off the machine.

11-2) How to enter the PTT parameter mode

1. In the user mode, press the SCAN button to enter the scan mode and press #, 9, 7, 6, 9, #.

2. The following message is displayed on the LCD.

PTT PRAMETER

#1 BIT SWITCH

BIT SWITCH menu

3. Each time the right or left arrow key is pressed, the menu is changed.

PTT PRAMETER

#2 NUMERIC PARAM.

NUMERIC PARAM. menu

PTT PRAMETER

#3 FAX TYPE

Note: Not used in servicing.

PTT PRAMETER

#4 NCU

Note: Not used in servicing.

PTT PRAMETER

#5 PTT SPECIAL

Note: Not used in servicing.

PTT PRAMETER

#6 FAX TEST

Note: Not used in servicing.

4. Press the OK button after ?g#1 BIT SWITCH?h or ?g#2 NUMERIC PARAM.?h is displayed to enter each mode.

36 / 41