Canon PIXMA MX870 Series Manuel de configuration du réseau - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de configuration du réseau pour {nom_de_la_catégorie} Canon PIXMA MX870 Series. Canon PIXMA MX870 Series 16 pages. Setting up in default mode (tel priority mode) without an answering machine
Également pour Canon PIXMA MX870 Series : Manuel d'installation (17 pages), Manuel d'installation (11 pages), Manuel de configuration du réseau (34 pages), Brochure (2 pages), Manuel d'installation du réseau (24 pages), Manuel d'installation du réseau (17 pages), Manuel de configuration (15 pages), Mise en place (15 pages)

Specifying the Machine's IP Address (IPv4 only)

Action

The machine's IP Address can be specified by the following procedure.

Press the Setup button.

Select Device settings, then press the OK button.

Select LAN settings, then press the OK button.

Select Other settings, then press the OK button.

Select IPv4/IPv6 setting, then press the OK button.

Select IPv4, then press the OK button.

Select Yes, then press the OK button.

Select Manual setup, then press the OK button.

•

Follow the on-screen instructions to proceed with settings.

•

When the setup is complete, press the COPY button.

Action

Follow the procedure below to restore LAN settings of the machine to the default state.

Press the Setup button.

Select Device settings, then press the OK button.

Select LAN settings, then press the OK button.

Select Reset LAN settings, then press the OK button.

Select Yes, then press the OK button.

Make sure that the completion screen appears, press the OK button.

•

The LAN settings screen returns. Press the COPY button.

The LAN setting of the machine is now restored to the default state.

•

Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired Setup"

and onward in the printed manual: Getting Started.

Wireless LAN

Inactive

SSID

BJNPSETUP

Data encryption

Inactive

TCP/IP setting

Obtain an IP address automatically

Wired LAN

Inactive

TCP/IP setting

Obtain an IP address automatically