Canon PIXMA MX870 Series Manual de configuración de red - Página 13

Navegue en línea o descargue pdf Manual de configuración de red para Impresora todo en uno Canon PIXMA MX870 Series. Canon PIXMA MX870 Series 16 páginas. Setting up in default mode (tel priority mode) without an answering machine
También para Canon PIXMA MX870 Series: Manual de instalación (17 páginas), Manual de instalación (11 páginas), Manual de configuración de red (34 páginas), Folleto (2 páginas), Manual de instalación en red (24 páginas), Manual de instalación en red (17 páginas), Manual de instalación (15 páginas), Puesta en marcha (15 páginas)

Canon PIXMA MX870 Series Manual de configuración de red

Specifying the Machine's IP Address (IPv4 only)

Action
The machine's IP Address can be specified by the following procedure.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Other settings, then press the OK button.
5
Select IPv4/IPv6 setting, then press the OK button.
6
Select IPv4, then press the OK button.
7
Select Yes, then press the OK button.
8
Select Manual setup, then press the OK button.
Follow the on-screen instructions to proceed with settings.
When the setup is complete, press the COPY button.

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
5
Select Yes, then press the OK button.
6
Make sure that the completion screen appears, press the OK button.
The LAN settings screen returns. Press the COPY button.
The LAN setting of the machine is now restored to the default state.
Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired Setup"
and onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically
Wired LAN
Inactive
TCP/IP setting
Obtain an IP address automatically