AIR GAP TAP-A-FLOW AG250-303 Procédures d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Procédures d'installation pour {nom_de_la_catégorie} AIR GAP TAP-A-FLOW AG250-303. AIR GAP TAP-A-FLOW AG250-303 2 pages. Floor pedal, stainless steel finish

Imprimer la page

1 – Floor pedal

2 – #6x1 mounting screws

2 – 1"x3" Double sided adhesive pads

The AG250-303, in combination with

AG250-002 valve, provides hands-free

faucet operation. Valve is ordered

separately.

Please read the instructions once through before starting.

PEDAL INSTALLATION INSTRUCTIONS

Pass cable from the AG250-002 valve

through an opening under the cabinet plate and

connect it to the pedal AG250-303.

Unscrew the front nut (1) on the valve cable and insert the

cable (4) through the slot on the back side of AG250-303

pedal. The rear nut (3) remains at the end of the thread (2).

Adjust cable holder (2) for proper pedal operation and

secure its position with nuts (1) and (3). Use 3/32 wrench

for tightening nuts(M5x0.8mm).Control cable (4) should be

snug. (FIG.1)

FIG. 1

AG250-303

Installation Procedures

LIST OF PARTS ENCLOSED

-OVER-

AG250-002

Cold/Hot Potable Water

Mechanical Valve

Verify that valve actuating cable is inside the

valve receptacle( FIG.2)

FIG. 2

Insert valve cable end T-bar (5) into the pedal

lever (6) (FIG.3)

FIG. 3