AIR GUARD AG-700 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AIR GUARD AG-700. AIR GUARD AG-700 12 pages. Antibacterial vaporizer
Imprimer la pageFluid
Important
Always monitor tank fluid level as you are operating. Running a machine with no fluid can
permanently damage the unit. If you experience low output, pump noise or no output at all, unplug
immediately. Check fluid level, the external fuse, remote connection, and power from the wall. If
all of the above appears to be O.K., plug the unit in again. If vapor does not come out after pressing
the remote button for 30 seconds, check the hose attached to the tank to make sure there is fluid
going through the hose. If you are unable to determine the cause of the problem, do not simply
continue pushing the remote button, as this may damage the unit. Return the machine to your AG-
700 Distributor.
Performance Notes
• All machines develop condensation around the output nozzle. Because this may result in
some moisture accumulation on the surface below the output nozzle, consider this
condensation when installing your unit.
• Machines may sputter small amounts of fog occasionally during operation and for a minute
or so after being turned off.
• All machines have a recycling period after bursts of vapor when the machine will shut down
for a short period in order to heat back up. During this time no vapor can be produced.
• Only for liquids with certified suitability.
Use Air Guard Antibacterial Solution for AG-700. The
machine is tested and calibrated with these authorized
fluids to achieve the best performance. Warranty
will be void, if any other type of liquid is used. Improper
use of liquid may lead to machine failure and danger.
Save these instructions
7