Daema DWF-1318XLE Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Daema DWF-1318XLE. Daema DWF-1318XLE 8 pages.

Imprimer la page

Control Panel Functions

Control Panel

Standard

Heavy

Gentle

Quick Wash

DWF-1318XLE

POWER:

Plug the power cord, press this button, the power will be connected. Press this

button again to shut off the power.

CAUTION:

1. Press POWER button to connect power, automatically turn off when idle for

more than 5 minutes.

2. When operating, after press START/PAUSE button, it automatically turn off

when idle for more than 10 minutes.

Connect power and press this button, the chosen program will start running.

START/PAUSE:

Press again, chosen program will pause.

STANDARD:

Default program, suitable for daily soiled clothing like shirt and pants.

HEAVY:

Strong washing flow, suitable for towel and other heavy clothing.

GENTLE:

Suitable for silk or other delicate clothing.

QUICK WASH:

Low water level, suitable for less dirty or light clothing.

SOAK:

An additional washing program, only suitable for STANDARD and HEAVY mode.

After selecting, SOAK will light up together with the chosen program. Display

shows "JP". When soaking, tub rotates discontinually. Soaking time sets

automatically according to water level, manual not available. Soaking time for

water level LOW and E.LOW:20 minutes; water level HIGH and MID:30 minutes.

WASH:

Select for wash program.

RINSE:

Select for rinse program.

SPIN:

Select for spin program.

All buttons will not function under safety lock mode, except to unlock. Alarm

SAFETY LOCK:

beeps when lid is open under safety lock mode. For safety purpose, washer will

drain the water if lid opens for too long.

Choose the suitable water level according to load size. (E.LOW~HIGH)

WATER LEVEL:

Select suitable preset time (1~24 hours).

Preset time is to set the time for start washing. 1 hour preset time means

PRESET:

program will start washing after 1 hour. PRESET is an additional function on top

of other features.

• Fuzzy program starts display with"- - "

• When program is running, display shows remaining time (Rem) in "minute"

• When PRESET mode operating, display shows preset time (Preset) in "hour"

• When SOAK mode operating, display shows "JP"

• When error occurs, display shows error code, see page 13

Before using

Soak

High

Wash

Mid

Rem.

(Min.)

Rinse

Little

Preset

Spin

Low

(Hour)

Safety Lock

Power

Start/Pause

Things to Check

efore

perating

Things to Check

efore

When selecting a washing program, choose the water level according to load size.

•

May choose different water levels for different programs.

Once START/PAUSE button pressed (washing program running), the selected

•

program cannot be changed. To change washing program, turn the power off then

turn on again.

•

The indicator light blink while program is running. Indicator light will light up when

program is selected.

•

Guide for operation buttons:

Other than POWER button, the rest of the button do not work when the

washer is beeping; PRESET is working; or wash course ends.

When washer is paused, PRESET button will not function.

•

To avoid washer overheat which could cause thermostat to operate, please do not

continuously run the washer more than

Usage of Softener

At the beginning of washing, if desired, you may add fabric softener to the softener

inlet. If the input is in a poor position, you can rotate the washing tub clockwise.

•

During the rinsing process, do not open the tub cover. On the contrary, softener will

be put in ahead of time, and it will affect the result.

•

If the concentrated softener is used, dilute it with water one third of its original

concentration before pouring it into the softener inlet.

Do not leave softener in the softener inlet for long periods, it may agglomerated.

•

Do not mix softener with other detergent, it may cause chemical reaction.

CAUTION: While thermostat is operating, washer will stop functioning. Washer will resume

to normal when its temperature decreases.

This appliance is not intended for use by persons(including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

our

ashing

achine

Before using

perating

our

ashing

3 cycles.

achine