ページを印刷するControl Panel Functions
Control Panel
Standard
Heavy
Gentle
Quick Wash
DWF-1318XLE
POWER:
Plug the power cord, press this button, the power will be connected. Press this
button again to shut off the power.
CAUTION:
1. Press POWER button to connect power, automatically turn off when idle for
more than 5 minutes.
2. When operating, after press START/PAUSE button, it automatically turn off
when idle for more than 10 minutes.
Connect power and press this button, the chosen program will start running.
START/PAUSE:
Press again, chosen program will pause.
STANDARD:
Default program, suitable for daily soiled clothing like shirt and pants.
HEAVY:
Strong washing flow, suitable for towel and other heavy clothing.
GENTLE:
Suitable for silk or other delicate clothing.
QUICK WASH:
Low water level, suitable for less dirty or light clothing.
SOAK:
An additional washing program, only suitable for STANDARD and HEAVY mode.
After selecting, SOAK will light up together with the chosen program. Display
shows "JP". When soaking, tub rotates discontinually. Soaking time sets
automatically according to water level, manual not available. Soaking time for
water level LOW and E.LOW:20 minutes; water level HIGH and MID:30 minutes.
WASH:
Select for wash program.
RINSE:
Select for rinse program.
SPIN:
Select for spin program.
All buttons will not function under safety lock mode, except to unlock. Alarm
SAFETY LOCK:
beeps when lid is open under safety lock mode. For safety purpose, washer will
drain the water if lid opens for too long.
Choose the suitable water level according to load size. (E.LOW~HIGH)
WATER LEVEL:
Select suitable preset time (1~24 hours).
Preset time is to set the time for start washing. 1 hour preset time means
PRESET:
program will start washing after 1 hour. PRESET is an additional function on top
of other features.
• Fuzzy program starts display with"- - "
• When program is running, display shows remaining time (Rem) in "minute"
• When PRESET mode operating, display shows preset time (Preset) in "hour"
• When SOAK mode operating, display shows "JP"
• When error occurs, display shows error code, see page 13
Before using
Soak
High
Wash
Mid
Rem.
(Min.)
Rinse
Little
Preset
Spin
Low
(Hour)
Safety Lock
Power
Start/Pause
Start/Pause
6
Things to Check
B
efore
O
perating
Things to Check
B
efore
O
When selecting a washing program, choose the water level according to load size.
•
May choose different water levels for different programs.
Once START/PAUSE button pressed (washing program running), the selected
•
program cannot be changed. To change washing program, turn the power off then
turn on again.
•
The indicator light blink while program is running. Indicator light will light up when
program is selected.
•
Guide for operation buttons:
1.
Other than POWER button, the rest of the button do not work when the
washer is beeping; PRESET is working; or wash course ends.
2.
When washer is paused, PRESET button will not function.
•
To avoid washer overheat which could cause thermostat to operate, please do not
continuously run the washer more than
Usage of Softener
At the beginning of washing, if desired, you may add fabric softener to the softener
inlet. If the input is in a poor position, you can rotate the washing tub clockwise.
•
During the rinsing process, do not open the tub cover. On the contrary, softener will
be put in ahead of time, and it will affect the result.
•
If the concentrated softener is used, dilute it with water one third of its original
concentration before pouring it into the softener inlet.
Do not leave softener in the softener inlet for long periods, it may agglomerated.
•
•
Do not mix softener with other detergent, it may cause chemical reaction.
CAUTION: While thermostat is operating, washer will stop functioning. Washer will resume
to normal when its temperature decreases.
This appliance is not intended for use by persons(including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
Y
our
W
ashing
M
achine
Before using
perating
Y
our
W
ashing
M
3 cycles.
7
achine