Daessy DSAM4 Manuel d'instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Daessy DSAM4. Daessy DSAM4 6 pages. Swing aside mount

Imprimer la page

Attach Frame Clamp Assembly to Wheelchair Frame

This step requires 2 components:

• Wheelchair

• Frame Clamp Assembly

Find the location on the wheelchair to attach the Frame Clamp Assembly

(this should have been identified prior to ordering); most often the

location will be either near the front caster wheel or on the seat frame.

Make sure the location is part of the wheelchair frame, not a movable

attachment like the footrest.

At the selected location; fit the Frame Clamp Assembly around the tube.

Replace the bolts and gently tighten them, do NOT fully tighten them at

this time. The frame clamp "cap" should face towards the inside of the

wheelchair.

Orient Frame Clamp Assembly

The most common option is to assemble this mount with the

Blue Handle at the top (pointing upwards). The Frame Clamp

"Cap" must be on the inside and the RFCR on the outside of

the chair (as shown in the photos to right). All bolts should

still be loose enough to allow adjustment.

Attach the ROP to the Vertical S-bend Tube.

Using one finger, align the Pinch Clamp with the inside of the

tube-hole in the ROP. Slide the ROP onto the tube to the

desired position, and then tighten the Pinch Clamp.

Printed in Canada

Manufactured by Daedalus Technologies in Canada

Swing Aside Mount Assembly

www.daessy.com

DSAM4

Page 3 of 6