Daessy DSAM4 Montagehandleiding - Pagina 3

Blader online of download pdf Montagehandleiding voor {categorie_naam} Daessy DSAM4. Daessy DSAM4 6 pagina's. Swing aside mount

Attach Frame Clamp Assembly to Wheelchair Frame

This step requires 2 components:
• Wheelchair
• Frame Clamp Assembly
Find the location on the wheelchair to attach the Frame Clamp Assembly
(this should have been identified prior to ordering); most often the
location will be either near the front caster wheel or on the seat frame.
Make sure the location is part of the wheelchair frame, not a movable
attachment like the footrest.
At the selected location; fit the Frame Clamp Assembly around the tube.
Replace the bolts and gently tighten them, do NOT fully tighten them at
this time. The frame clamp "cap" should face towards the inside of the
wheelchair.

Orient Frame Clamp Assembly

The most common option is to assemble this mount with the
Blue Handle at the top (pointing upwards). The Frame Clamp
"Cap" must be on the inside and the RFCR on the outside of
the chair (as shown in the photos to right). All bolts should
still be loose enough to allow adjustment.
Attach the ROP to the Vertical S-bend Tube.
Using one finger, align the Pinch Clamp with the inside of the
tube-hole in the ROP. Slide the ROP onto the tube to the
desired position, and then tighten the Pinch Clamp.
Printed in Canada
Manufactured by Daedalus Technologies in Canada
Swing Aside Mount Assembly
www.daessy.com
DSAM4
Page 3 of 6