bolid DIP-34PA-03 Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} bolid DIP-34PA-03. bolid DIP-34PA-03 4 pages.

Imprimer la page

Addressable Photoelectric Smoke Detector

GENERAL

DIP-34PA-03 Addressable Photoelectric Smoke Detector (hereinafter referred to as the DIP-34PA-03 or the detector) is

designed to be used in a fire alarm system in order to detect smoke inside enclosed premises by sensing light reflected

by smoke particles. The detector meets the requirements of Appendix "Р" of Russian Rules СП5.13130.2009.

The DIP-34PA-03 operates under control of a Signal-10 Intrusion and Fire Alarm Control Unit in an alarm loop of Type 14,

Fire Threshold Addressable. Up to ten detectors each having its own address from 1 to 10 can be brought into a single

Signal-10 alarm loop of Type 14. Each detector responds with its state to the Signal-10. These states can be Fire Alarm,

Trouble, Dusty, Norm, and Test. Electromagnetic compatibility of the detector meets the requirements for the third

resistance level.

The version of DIP-34PA-03 firmware is 1.00. Please read the Signal-10 User's Manual to get more information about

DIP-34PA-03 operation.

The detector's operability can be tested by means of a laser tester (such as the tester produced by System Sensor).

SPECIFICATIONS

Sensitivity

Response Time

Ingress Protection Rating

Input Voltage (via a Signal-10 alarm loop in threshold mode)

Current Consumption (via an alarm loop of a Signal-10)

Pre-operation Time

The number of detectors per alarm loop

Operating Temperatures

Storage Temperatures

Humidity

Overall Dimensions (diameter x height)

Weight

The detector doesn't contain precious metals (Clause 1.2 of ГОСТ 2.608-78)

STANDARD DELIVERY

For single-piece delivery:

DIP-34PA-03 Detector

Instruction Manual

Address Sticker

Protective Cover

Unit Package

WIRING

Figure 1 shows the standard wiring diagram to connect DIP-34PA-03

detectors into an alarm loop of the Type 14 of a Signal-10 control

unit. The first terminal of a detector base can be used to connect a

shield of the connecting wire.

DIP-34PA-03

INSTRUCTION MANUAL

- 1 pc.

0.05 - 0.2 dB/m

10 s max

IP 41

9 ÷ 30 VDC

0.4 mA max in quiescent mode

60 s max

Up to 10

−30 to +55° C

−50 to +50° C

93% at 40° C, non-condensing

100 mm × 47 mm max

0.2 kg max

For group delivery:

DIP-34PA-03 Detector

Instruction Manual

Address Sticker

Protective Cover

Group Package

- 10 pcs.

- 1 pc.

- 10 pcs.

- 1 pc.

Figure 1. Wiring Diagram