bolid ShPS-12 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} bolid ShPS-12. bolid ShPS-12 4 pages. Fire equipment mount boxes with backup battery power supplies

Imprimer la page

1.3 Scope of Delivery

Table 2 presents the delivery scope for the ShPS-12.

ShPS-12

ShPS-12 mod.01

ShPS-12 mod.02

ShPS-12 mod.10

ShPS-12 mod.11

ShPS-12 mod.12

Accessory Kit:

Fasteners: (eye bracket, bolt, nut, screw, wall plug)

Rubber cable gland:

ShPS-12; ShPS-12 mod.01

ShPS-12 mod.10; ShPS-12 mod.11

ShPS-12 mod.02; ShPS-12 mod.12

For ShPS-12 mod.10, ShPS-12 mod.11, ShPS-12 mod.12:

Jumper MJ-0-6 (2.54 × 6 mm)

Key

Packaging

Documentation

ShPS-12, ShPS-12 mod.01, ShPS-12 mod.02, ShPS-12 mod.10, ShPS-12 mod.11, ShPS-12

mod.12 Operations Manual

Note. No battery is included in the standard delivery!

INTENDED USAGE

2.1 The product design meets the requirements of fire and electric safety including emergency operation in

accordance with Russian standards GOST 12.2.007.0-75 and GOST 12.1.004-91.

2.2 The ShPS-12 shall be wired as shown in the connection diagram located on the inside of the ShPS-12's

cover.

2.3 Do shut off the mains power from the ShPS-12 before mounting, installing, and

maintaining this one.

2.4 Operating restrictions, design, mounting, connecting, settings, testing and operation

procedures for the ShPS-12 are defined in details in its User's Manual (the full version),

which is available online at

the mobile app 'Mobile Product Catalogue' https://bolid.ru/support/mobile-catalogue/.

2.5 If a technical failure of the product has been found, the equipment shall be taken out

of operation and sent for repair in accordance with Section 4.

MAINTENANCE

3.1 The ShPS-12 shall be maintained by persons qualified for Electrical Safety of Level III or higher.

3.2 Maintenance works for the ShPS-12 are described in its User's Manual (the full version, see Section 2.4

of this manual).

REPAIR

4.1 Repair of faulty equipment is to be performed by the manufacturer or in authorized repair centers. The

equipment shall be sent for repair in compliance with Company Standard QMS 8.5.3-2015, which can be found

online at our website https://bolid.ru/support/remont/.

Attention!

The equipment shall be submitted for repair being assembled and clean and along with all the

parts listed in the documentation.

Claims are accepted only if a reclamation report describing the failure is applied to the submitted

equipment.

4.2 A product's failure resulted from consumer's not observing rules of mounting and operation is not a

reason for claims and warranty repair.

4.3 Claims should be submitted to the following address:

NVP BOLID, #4 Pionerskaya Str., Korolyov, Moscow Region, 141070, Russia

Phone/fax: +7 (495) 775-71-55 (PBX). E-mail:

4.4 In case of any issue related to use of the product, please contact the technical support: +7 (495) 775-71-

55 or e-mail: [email protected].

STORAGE

5.1 In a transport container the equipment can be stored at ambient temperatures ranged from minus 30°С

to +50°С and relative humidity of 95% at +35°С.

5.2 In consumer packages the equipment can be stored only in heated premises at ambient temperatures

+5°С through +40°С and relative humidity up to 80% at +20°С.

Item

bolid.ru

in the section Products on the page of ShPS-12 or using

[email protected]

Table 2

Q-ty, pcs.