Canon LV-5220 - Multimedia Projector SVGA Spécification fonctionnelle - Page 22
Parcourez en ligne ou téléchargez le pdf Spécification fonctionnelle pour {nom_de_la_catégorie} Canon LV-5220 - Multimedia Projector SVGA. Canon LV-5220 - Multimedia Projector SVGA 42 pages. Multimedia projectors
Également pour Canon LV-5220 - Multimedia Projector SVGA : Spécification fonctionnelle (20 pages), Spécifications (6 pages)
Imprimer la page
Expand Serial Command Functional Specification
8.8.2. CF_FLSCREN Command
Command
"CF_FLSCREN_%1" [CR]
"ON" ------------- Select Full Screen
%1
"OFF" ------------ Cancel Full Screen
PC Input
Details
Video Input
Acceptable
Response
Unacceptable
8.8.3. CF_TRUE Command
Command
"CF_TRUE_%1" [CR]
"ON" ---------- Select True mode
%1
"OFF" --------- Cancel True mode
Set / Cancel True mode
Details
Only valid when it is in the usual Power On state and Input is Computer.
Acceptable
Response
Unacceptable
8.8.4. CF_DZCENT Command
Command
"CF_DZCENT_%1" [CR]
%1
"CENT" ---------- Cancel Digital Zoom (CENT: "CENTER")
Cancel Digital Zoom.
Details
Only valid when it is in the usual Power On state and Input is Computer.
Acceptable
Response
Unacceptable
8.8.5. CF_KEYSTONE Command
Command
"CF_KEYSTONE_%1" [CR]
"UP" ----------- Make the screen image length at the top edge shorter with small
"FUP" --------- Make the screen image length at the top edge shorter with large
"DN" ---------- Make the screen image length at the bottom edge shorter with
"FDN" ------ -- Make the screen image length at the bottom edge shorter with
%1
"LEFT" -------- Make the screen image length at the left edge shorter with small
"FLFT" ------- Make the screen image length at the left edge shorter with large
" R I G H T " - - - - Make the screen image length at the right edge shorter with
" F R G T " - - - - - - Make the screen image length at the right edge shorter with
"RST" --------- Keystone off
Details
Change Keystone range. (Only valid when it is in the usual Power On status）
Acceptable
Response
Unacceptable
Set / Cancel Full Screen.
(Only valid when it is in the usual Power On status)
The value set by this Command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will
return to the original setting. (Stay in Standby mode)
Unvalid
"000" [CR]
"Error Code" [CR]
"000" [CR]
"101" [CR] ------ Input is Video
"000" [CR]
"101" [CR] ------ Input is Video
range.
range.
small range.
large range.
range.
range.
small range.
large range.
"000" [CR]
"Error Code" [CR]
"201" [CR] ---- When Keystone value is maximum or minimum.
Page 21 of 41