Dormakaba Package 04 Manuel d'instructions d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Dormakaba Package 04. Dormakaba Package 04 9 pages. Side load wood door and steel frame
Imprimer la page
dormakaba RTS88 Package 04 Installation Instructions
1
Installation instructions
1.1 Prepare frame and install closer
Fig.1
Fillister head
machine
screws
NOTE: 8532 mounting channel is to be installed prior
to frame installation.
1.1.1
Prepare header according to template.
1.1.2
Fasten angle bracket to closer with two hex
head machine screws and flat washers.
1.1.3
Install 2 fillister head machine screws into
mounting tabs on closer; make approximately 3
turns.
NOTE: For RTS88 models only - do not remove spacer
washers in mounting tabs.
1.1.4
Install closer into mounting channel in header
by inserting mounting tabs into mounting
bracket.
RTS88 Closers
Header
Mounting channel
Closer
Cover plate
1.1.5
1.1.6
1.1.7
1.1.8
08280291
Angle bracket
1/4-20 screws
with lock
washers and
nuts
Raise end of closer with angle bracket onto
the two 1/4-20 screws installed in mounting
channel.
Fasten angle bracket to remaining 1/4-20
screws with lock washers and nuts.
Tighten the 2 fillister head machine screws.
SECURELY!
Install cover plate by sliding tab into frame
and fasten opposite end to mounting bracket
with two No. 8-32 flat head machine screws
provided.
Frame
Closer
02-2020
3