Electralog DF2006 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electralog DF2006. Electralog DF2006 15 pages.

www.sylvane.com 1-800-934-9194

FIGURE 5

FIGURE 6

FIrePlaCe InsTallaTIOn

nOTe

A 15amp, 120 volt alternating current (VAC) circuit is required. A

dedicated circuit is preferred but not essential in all cases. A dedicated

circuit will be required if, after installation, the circuit breaker trips or

fuse blows on a regular basis when the heater is operating. Additional

appliances on the same circuit may exceed the current rating of the

circuit breaker.

WarnInG

Ensure the power cord is not installed so that it is pinched or against a

sharp edge and ensure that the power cord is stored or secured to avoid

tripping or snagging to reduce the risk of fire, electric shock or injury to

persons.

Construction and electrical outlet wiring must comply with local building

codes and other applicable regulations to reduce the risk of fire, electric

shock and injury to persons.

Do not attempt to wire your own new outlets or circuits. To reduce the