Electralog DF2006 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Electralog DF2006. Electralog DF2006 15 pages.

a. MaIn On/OFF sWITCH

The switch has two ON positions marked with and "Manual".

The "Manual" position is for manual operation. In this position the

built-in remote control is by-passed.

The position is for operating the unit with the provided remote

control.

When in position the unit is operated with the ON and OFF

buttons of the remote control. When the switch is in the center

position the unit is off.

B. HeaTer On sWITCH

The HEAT ON/OFF SWITCH supplies power to the heater fan and

the heater element. When the switch is in the ON position the heater

operates if the thermostat calls for heat.

C. HeaTer THerMOsTaT COnTrOl

To adjust the temperature to your individual requirements, turn the

thermostat control clockwise all the way to turn on the heater. When

the room reaches the desired temperature, turn the thermostat knob

counter clockwise until you hear a click. Leave in this position to

maintain the room temperature at this setting. For additional heat,

turn clockwise until you hear the click again and the heater will turn

on.

reseTTInG THe TeMPeraTUre CUTOFF sWITCH

Should the heater overheat, an automatic cut out will turn the heater

off and it will not come back on without being reset. It can be reset by

switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes

before switching the unit back on.

CaUTIOn

If you need to continuously reset the heater, unplug the unit and call

technical support at 1-888-346-7539.

nOTe

The heater may emit a slight, harmless odor when first used. This odor

is a normal condition caused by initial heating of internal heater parts and

will not occur again.