Dahua 2M HD IP Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dahua 2M HD IP. Dahua 2M HD IP 11 pages. Fixed mini bullet camera
Imprimer la page
Installation -
Installation
Before installing your camera, you have to read the following cautions.
1. You have to check whether the location can bear five times of the weight of your camera.
2. Don't let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
it may cause a breakdown or fire.
3. When installing your camera, don't allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
Template Sheet
To pass cables through the wall/ceiling, drill holes on
1
the wall/ceiling.
Connect the network cable, power cable respectively.
2
See the section 'Installation - Cabling' for details.
Fix the camera on the wall/ceiling by screw provided.
3
After adjusting the view angle, tighten the Pan/Tilt
4
stoper screw.
Reset to the Factory Defaults
Press the reset button for 5 seconds to return the setup
to the Factory Default.
Warning:
If you press the 'Reset' button, you will lose all setting
data. If needed, please, make a note for further
installation.
Reset Button
Put the Lan cable into (a), then (b) will be assembled to (a)
tightly. As a final step, (c) need to be assembled to (b)
without making any space.
b
a
Loosen the Pan/Tilt stoper screw a little before fixing the camera.
c