Dahua 2M HD IP Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan Dahua 2M HD IP. Dahua 2M HD IP 11 halaman. Fixed mini bullet camera

Installation -

Installation

Before installing your camera, you have to read the following cautions.

1. You have to check whether the location can bear ﬁve times of the weight of your camera.

2. Don't let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise

it may cause a breakdown or ﬁre.

3. When installing your camera, don't allow any person to approach the installation site. If you have any

valuable things under the place, move them away.

Template Sheet

To pass cables through the wall/ceiling, drill holes on

the wall/ceiling.

Connect the network cable, power cable respectively.

See the section 'Installation - Cabling' for details.

Fix the camera on the wall/ceiling by screw provided.

After adjusting the view angle, tighten the Pan/Tilt

stoper screw.

Reset to the Factory Defaults

Press the reset button for 5 seconds to return the setup

to the Factory Default.

Warning:

If you press the 'Reset' button, you will lose all setting

data. If needed, please, make a note for further

installation.

Reset Button

Put the Lan cable into (a), then (b) will be assembled to (a)

tightly. As a ﬁnal step, (c) need to be assembled to (b)

without making any space.

Loosen the Pan/Tilt stoper screw a little before ﬁxing the camera.