Doug Fleenor Design DMX24DIM-2U Manuel d'installation et d'utilisation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Doug Fleenor Design DMX24DIM-2U. Doug Fleenor Design DMX24DIM-2U 5 pages.

Imprimer la page

Product description

The DMX24DIM and DMX24DIM-2U are 24 channel, 100 Watt per channel dimmer packs. They are

fed by a single 120VAC 15A branch circuit. Each of the dimmers can be separately controlled using

a DMX512-based lighting controller. The DMX24DIM and DMX24DIM-2U are housed in enclosures

suitable for portable use or for mounting in a standard 19" rack. The DMX24DIM occupies 1U of rack

space. The DMX24DIM-2U occupies 2U of rack space. The DMX24DIM uses two conductor

ungrounded outlets while the DMX24DIM-2U provides grounded parallel blade output connectors.

Safety warnings

There are no user serviceable parts in the DMX24DIM or DMX24DIM-2U. Servicing should be

referred to qualified service personnel.

Do not connect or disconnect loads to the DMX24DIM or DMX24DIM-2U with the power on.

Environmental

Operating temperature: 0-40º C

Operating humidity: 10-90% non-condensing

Indoor use only

Electrical ratings

Input: 120VAC, 60Hz, 15A

Output: 24 outputs, 120VAC, 100W each, 1800W maximum total

Certification

The DMX24DIM and DMX24DIM-2U are ETL Listed under safety Standard UL 508

Mounting/installation

The DMX24DIM or DMX24DIM-2U can be used as a portable unit or it can be mounted in a standard

19" equipment rack. Care must be taken to allow for unobstructed airflow around the unit. There

must be at least 6 inches of clearance in front of the DMX24DIM or DMX24DIM-2U and two inches of

clearance on the left side of the enclosure (as viewed from the front panel). No blank spaces are

required above or below the DMX24DIM or DMX24DIM-2U when it is rack mounted.

Page 2 of 5