Doug Fleenor Design DMX24DIM-2U Посібник з монтажу та експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Диммер. Doug Fleenor Design DMX24DIM-2U. Doug Fleenor Design DMX24DIM-2U 5 сторінок.
Друкувати сторінкуProduct description
The DMX24DIM and DMX24DIM-2U are 24 channel, 100 Watt per channel dimmer packs. They are
fed by a single 120VAC 15A branch circuit. Each of the dimmers can be separately controlled using
a DMX512-based lighting controller. The DMX24DIM and DMX24DIM-2U are housed in enclosures
suitable for portable use or for mounting in a standard 19" rack. The DMX24DIM occupies 1U of rack
space. The DMX24DIM-2U occupies 2U of rack space. The DMX24DIM uses two conductor
ungrounded outlets while the DMX24DIM-2U provides grounded parallel blade output connectors.
Safety warnings
$
There are no user serviceable parts in the DMX24DIM or DMX24DIM-2U. Servicing should be
referred to qualified service personnel.
$
Do not connect or disconnect loads to the DMX24DIM or DMX24DIM-2U with the power on.
Environmental
Operating temperature: 0-40º C
Operating humidity: 10-90% non-condensing
Indoor use only
Electrical ratings
Input: 120VAC, 60Hz, 15A
Output: 24 outputs, 120VAC, 100W each, 1800W maximum total
Certification
The DMX24DIM and DMX24DIM-2U are ETL Listed under safety Standard UL 508
Mounting/installation
The DMX24DIM or DMX24DIM-2U can be used as a portable unit or it can be mounted in a standard
19" equipment rack. Care must be taken to allow for unobstructed airflow around the unit. There
must be at least 6 inches of clearance in front of the DMX24DIM or DMX24DIM-2U and two inches of
clearance on the left side of the enclosure (as viewed from the front panel). No blank spaces are
required above or below the DMX24DIM or DMX24DIM-2U when it is rack mounted.
Page 2 of 5