Baumer GNAMG. 153P Series Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Baumer GNAMG. 153P Series. Baumer GNAMG. 153P Series 19 pages. Inclination sensor with profibus-dp interface

Baumer GNAMG. 153P Series Manuel
Disclaimer of liability
The present manual was compiled with utmost care, errors and omissions reserved. For this reason
Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.
Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the
present information.
At any time we should be pleased receiving your comments and proposals for further improvement of the
present document.
Registered trademarks
PROFIBUS, the PROFIBUS Logo and PROFIdrive are registered trademarks of the PROFIBUS user
organization respectively of PROFIBUS International (PI). These and other names applied in the present
manual that at the same time are registered trademarks are not correspondingly marked. Having omitted the
respective marking does not necessarily imply that the names are not registered trademarks or that there are
no existing patents and protected patented designs.

1. Introduction

1.1. Scope of delivery

Please check the delivery upon completeness prior to commissioning.
Depending on encoder configuration and part number delivery is including:
 Encoder
 Describing file and manual (available as download in the Internet)

1.2. Product assignment

Product
GSD file
GNAMG.x213Pxx
GNAMG_15.gsd
GNAMG.x223Pxx
GNAMG_30.gsd
GNAMG.x233Pxx
GNAMG_60.gsd
GNAMG.x153Pxx
GNAMG360.gsd
Fig.: Inclination sensor on base plate
Baumer_GNAMG_Profibus_MA_EN
07.18
Product family
Inclination sensor
Inclination sensor
Inclination sensor
Inclination sensor
3/19
Baumer IVO GmbH & Co. KG
Villingen-Schwenningen, Germany