Baumer GNAMG. 153P Series Manuel - Sayfa 3

Aksesuarlar Baumer GNAMG. 153P Series için çevrimiçi göz atın veya pdf Manuel indirin. Baumer GNAMG. 153P Series 19 sayfaları. Inclination sensor with profibus-dp interface

Sayfayı Yazdır

Disclaimer of liability

The present manual was compiled with utmost care, errors and omissions reserved. For this reason

Baumer IVO GmbH & Co. KG rejects any liability for the information compiled in the present manual.

Baumer IVO nor the author will accept any liability for direct or indirect damages resulting from the use of the

present information.

At any time we should be pleased receiving your comments and proposals for further improvement of the

present document.

Registered trademarks

PROFIBUS, the PROFIBUS Logo and PROFIdrive are registered trademarks of the PROFIBUS user

organization respectively of PROFIBUS International (PI). These and other names applied in the present

manual that at the same time are registered trademarks are not correspondingly marked. Having omitted the

respective marking does not necessarily imply that the names are not registered trademarks or that there are

no existing patents and protected patented designs.

1. Introduction

1.1. Scope of delivery

Please check the delivery upon completeness prior to commissioning.

Depending on encoder configuration and part number delivery is including:

 Encoder

 Describing file and manual (available as download in the Internet)

1.2. Product assignment

Product

GSD file

GNAMG.x213Pxx

GNAMG_15.gsd

GNAMG.x223Pxx

GNAMG_30.gsd

GNAMG.x233Pxx

GNAMG_60.gsd

GNAMG.x153Pxx

GNAMG360.gsd

Fig.: Inclination sensor on base plate

Baumer_GNAMG_Profibus_MA_EN

07.18

Product family

Inclination sensor

3/19

Baumer IVO GmbH & Co. KG

Villingen-Schwenningen, Germany